UK Plumber Forum 

A place of resource for Plumbers and Gas Engineers in the UK.

Ask your general plumbing questions here. Please have a quick check to make sure it wouldn't fit in any other category.
By ryanTucker
#8337
Hey guys. I have a bit of an issue with my push button valve cistern flush. Basically when I flush it flushes fine but the plastic in the valve unit remains up and doesn't push back down on the rubber valve to stop the water running. If I take the cap off I can gently push the plastic down which pulls on the cable and returns it to it's proper position to stop the water running. Anyone have any idea on what I can do, the cable is in good condition, I am not sure if it is a fault in the valve unit of or they is a way I can improve the cable tention to push it shut. I thought about putting a weight on top of the plastic so there is a pressure pushing down on it to help it return to it's normally position but this is obvs a bit of a bodge.

Any help would be mega

Thanks

Ry

Hi & welcome to the forum. turn all your radi[…]

Armitage Model 5060 Cistern

Maybe a cracked cistern?...regards Turnpin

Blocked mains lead pipe

you have put the wrong type of tap on? a gate valv[…]

Dishwasher

https://www.ebay.co.uk/itm/Compatible-Bosch-Dishwa[…]