UK Plumber Forum 

A place of resource for Plumbers and Gas Engineers in the UK.

For when your troubles just won't soak away, sort out your drainage issues in here.
#7963
Hi, it's good to be here, just need some help and advice, i have put some pictures up, can you tell me if this will work? and be ok, or not ? i am going to add a 15 degree bend between the clay and what i have there already, then cut it all to fit in that gap, then i'm going to add a gulley..any help owul dbe helpful thanks
Attachments
2.jpg
2.jpg (166.01KiB)Viewed 13255 times
1.jpg
1.jpg (166.96KiB)Viewed 13255 times
#7966
SimonG wrote:So you doing a full height stack?
You'll need a rest bend and some means of rodding as well.
Hi SimonG, thanks for the reply, that made up piece there has a long radius rest bend on it, 87.5 and am not doing a full stack, the underground pipe part nearest the step, will be going to a stack, and somewhere on that stack there will be and air ventilation valve, you can use them at a lower height, far as i am aware, do you think what i have there, will be ok to use as i need ? and it not get blocked?, or can you offer any other solution, thanks

Replacing leaking valve is preferred option but if[…]

Shower Pump

Volume of water out of pump can be no more than vo[…]

A coy way to ramp up the bill catching out those w[…]

Gravity or mains fed shower?

Thanks Redsaw but this is a pumped electric sh[…]