Page 1 of 1
baxi pressure gauge needed
Posted: July 11th, 2020, 2:28 pm
by sunnybob
I have a6 year old baxi luna 3 condensing boiler. I need a new pressure gauge.
Any one able to point me towards a supplier? The guy who fitted no longer works and there are no on island suppliers.
The diagram shows 2 options, one with a push in connector, and one with a large nut. I have the large nut version.
Thanks
Re: baxi pressure gauge needed
Posted: July 11th, 2020, 11:51 pm
by REDSAW
Hi
what diagram & what is the GC number?
Re: baxi pressure gauge needed
Posted: July 12th, 2020, 5:16 am
by sunnybob
baxi plate.jpg (243.42KiB)Viewed 13320 times
baxi gauge.jpg (165.9KiB)Viewed 13320 times
baxi gauge conn..jpg (243.4KiB)Viewed 13320 times
I cant find exact part numbers on the web, most of what I can find does not have a picture.
The gauge has stopped working. While bleeding radiators I reduced the pressure to nil, but the gauge still showed what it is now.
Re: baxi pressure gauge needed
Posted: July 12th, 2020, 1:58 pm
by REDSAW
thats a propane boiler. where are you Canary islands?
the best place would be to contact wolesley parts center and they will get anything otherwise baxi direct- but thats in the u.k for us.
part 169 on here:
https://baxi.ru/upload/iblock/b3e/luna_ ... -_eng_.pdf
Also it looks like a the u.k baxi/duotec GA type fit & diverter valve where the nut attaches, of the same age
BAXI JJJ009951830
Re: baxi pressure gauge needed
Posted: July 12th, 2020, 2:26 pm
by sunnybob
Cyprus. We have our very own "Cyprus mix"of propane and butane.
I have UK family happy to bring me parts as soon as Cyprus allows UK airplanes to land again.
I'll try to get in touch with wolsely thanks.
While youre here, when I get a reply message from this site, all the hyperlinks are bad. They are blended into the wording and I have to look up the site and chase the threads.