UK Plumber Forum 

A place of resource for Plumbers and Gas Engineers in the UK.

Want to get squeaky clean but something's wrong? Go ahead and ask away in here.
By Dave T
#6213
Hi guys, first post on here so thanks in advance and hoping someone can help. Ok replacing my ensuite shower due to leaking issues, removed the old mixer valve which was pushed directly onto the feeds and locked with allan screws. Well the replacement valve has 2 separate fittings, one end has 2 o rings for push fit into the valve and the other end of these are male 15mm bsp, thought I could use 15 mm compression fitting with is but doesnt look like it will seat a olive? And help would be great. Cheers . Dave

Replacing leaking valve is preferred option but if[…]

Shower Pump

Volume of water out of pump can be no more than vo[…]

A coy way to ramp up the bill catching out those w[…]

Gravity or mains fed shower?

Thanks Redsaw but this is a pumped electric sh[…]