UK Plumber Forum 

A place of resource for Plumbers and Gas Engineers in the UK.

Want to get squeaky clean but something's wrong? Go ahead and ask away in here.
100 %
By Des1984
#7242
Hi folks, Firstly I'm on a water well with a tank in my garden, I'm new to this and don't really know much about how it works.
Anyway I have an electric shower which runs directly from this tank with a pump fitted before the shower to boost the pressure. The shower works with pretty poor pressure but when you turn the temp below 5 the low pressure light comes on and the shower goes freezing cold. When you turn the temp up the light goes off and it goes boiling hot.
Any ideas of what's wrong??
User avatar
By REDSAW
#7243
first thing to eliminate is the shower hose and head, try it with another if you can loan one.
a simple collapse of the rubber hose or blocking of the head can cause this.

next, take off the head and run into a measure and time it for flow per minute, then work out the same with a basin tap and tell us the shower make and pump capacity.
then check for isolation valves.

hi i dont do drainage myself but theres one or two[…]

Help! Danfloss BPT pump

Turn it more till it goes. Wont be seized. Need a […]

Hello

Take it with a pinch of salt mate, he is a sq[…]

Drainage add ons for extension

Blocked drains can lead to many problems including[…]