UK Plumber Forum 

A place of resource for Plumbers and Gas Engineers in the UK.

Ask your general plumbing questions here. Please have a quick check to make sure it wouldn't fit in any other category.
User avatar
By REDSAW
#6358
Hi,
its a multiquick and that one is now obsolete.
it has been replaced by the B228 model that will retrofit in to the existing cradle.
By Ahr35181
#6359
Redshaw,

Thanks for your reply. It was just the seal that needed changing, which I replaced with a Fluidmaster seal from screwfix for now... https://www.screwfix.com/p/fluidmaster- ... tid=354159

I believe all my toilets use the same parts, where could I purchase the multiquick B228 from? I googled but struggling to source?
User avatar
By REDSAW
#6360
Ahr35181 wrote:
December 31st, 2019, 3:56 pm
Redshaw,

Thanks for your reply. It was just the seal that needed changing, which I replaced with a Fluidmaster seal from screwfix for now... https://www.screwfix.com/p/fluidmaster- ... tid=354159

I believe all my toilets use the same parts, where could I purchase the multiquick B228 from? I googled but struggling to source?
the cable or the dump seal are the things that tend to go on these. cleaning them of limescale or poping any blisters in the rubber make the seal last longer, but having a replacement to hand saves stripping the toilet to bits to fit another brand,
https://www.ebay.co.uk/itm/1-5-Old-MULT ... SwaCVcpeHZ
Trianco Oil Boiler start-up

Thanks Simon. My error regarding the oil pressure.[…]

£14.00 an hour, your having a laugh. fa[…]

Help design my new heating.

Best advise is to get a good heating engineer in e[…]

So the pump from heat pump to header is generating[…]