UK Plumber Forum 

A place of resource for Plumbers and Gas Engineers in the UK.

Ask your general plumbing questions here. Please have a quick check to make sure it wouldn't fit in any other category.
By DanS
#8181
Hello

Can anyone advise where I can source tap tails (copper of flex) for a monobloc tap that come with a 3/8 inch BSTP male thread, for insertion into the tap bloc.

Does that sound an odd size?
No plumbers merchant I have been too has ever seen this, but most are young lads and I suspect this is a 25+ yr old tap and before their time

I've measured it with vernier calipers to confirm and it is 3/8 inch or in mm, 13.7mm.

I can't find any reference to 3/8 inch monobloc tap fittings online.

The tap is solid and great condition. I don't want to bin it for the sake of a tap tail.

As another option, I found 3/8 inch (male) to 15mm pipe adaptors that are used when fitting euro 3/8 tails to 15mm copper at the female end of the tail.
https://plumbingsuppliesdirect.co.uk/15 ... aps-1538a/

But, they don't have o rings, and no way to titghen them, so dubious I'd get a seal. Has anyone used them?

Any pointers appreciated.
User avatar
By REDSAW
#8185
Hi dan.

i get most of mine from a proper old school merchant. otherwise screwfix have what you need.
3/8th by the way are a uropean mainland size for products manufactured there or turkey.
Any pics?

Hi! Do you know if they make any plugins to protec[…]

Its a little block in a campsite, so sometimes all[…]

Washing Machine Tee 3/4" valve leaking

If the valve on your 3/4" washing machine tee[…]

We live in a listed building and our listed buildi[…]