UK Plumber Forum 

A place of resource for Plumbers and Gas Engineers in the UK.

Want to get squeaky clean but something's wrong? Go ahead and ask away in here.
50 % 50 %
By jack
Porkchop wrote:
April 17th, 2017, 8:41 am
Who fills bath with water when they seal it. If I've fitted the bath then I don't as bath is fully supported and can't move. Sometimes I fill existing baths

Sent from my E6653 using Tapatalk
if work of professional plumber not any other person solved it. So, try to contact with plumber that check it where is problems in bath
User avatar
By Best
No, I normally don't bother filling them with water, unless a steel or cast iron bath.
Plastic baths if properly supported with batons of wood screwed to walls, will not move.
If normal plastic baths haven't been supported, they will move anyway, doesn't matter if bath was filled with water, or not. Although if you glue them well to wall with silicone it can be unmovable
Old imperial pipe

1/2 inch would be 15.10mm so there isn`t much in i[…]

You will have to update the ID references and […]

Perhaps you make them feel nervous being in the tr[…]

Bath Shower Temperature Issue

Good suggestion